Landscape Lights Not Working? 4 Solutions To Common Problems

4 Solutions To Common Problems

Have you ever gone through the tripping moment when you came home late at night and because it was dark all around? Or have you ever experienced the fear of darkness when you step in your garden and light suddenly turns off?

I was the one who once experienced the falling and got injured severely. The reason was my landscape lights were not working.

There was some disconnection, and it was all dark there. I was unable to see the stone and directly fell off. Since then, I take care of my landscape lights and have gained all the essential knowledge of maintaining landscape lights and how to keep your outdoor lawn and other spaces always lightened.

I have come across the four most common problems that could occur in your landscape light, and what are the standard solutions that you can practically perform on your own to maximize the efficiency and working of your landscape lights.

I have decided to let you guys know how to take care of your landscape lights and how to be a professional while dealing with the problems of lightning.

Most Common Landscape Lights Problems & Solutions

Your landscape lighting should always be functioning because one error can cause problems on a large scale. Following are the four most common problems and their practical solution you can conveniently perform at your home to enchant your outdoor spacing again.

Problem No 1



This is the most common problem that could be the reason for landscape lighting not working. This is a significant problem that may lead you towards a dangerous risk.

Reasons Of Disconnection

Firstly, there are chances that your wiring may have got water in it. Another possibility is that there are faults at the installation time, such as the connections are covered with casual tapes and not with proper standardized connectors.

Moreover, it is also possible that bad connectors are used during the installation process.

Solutions For Disconnections

Make your connections waterproof to avoid entering water into the wires or bulbs. Take care of your connections when they are in the making process.

It will help you in making standardized and efficient connections without any existing flaws. Additionally, you can take guidance or give your outdoor lighting project to renowned companies or contractors. This will ultimately increase the performance of the connections, wires, and bulbs. Moreover, it will secure your overall Landscape Lightning.

Problem No 2

Repairing landscape lighting

Corrosion In Sockets or Wires

This is a rare problem that occurs, but still, it is a big problem that results in malfunctioning of landscape lighting and instantly turns your lit house into a dark site.

Reasons of Corrosion

There is one main reason for corrosion that is always noticed. It is that you have got burnt bulbs or water has entered in your sockets and wires or bulbs, but you have not solved it at the right time. This water stays there and makes your sockets and wires corroded. This results in excess corrosion, which ultimately causes darkness in your outdoor lighting.

Solution For Corrosion

Always keep in check the landscape lighting and make sure that all the connections are correct. If you notice any problem with wires or disconnecting or watering in the interior region of the wires and sockets, solve this as soon as possible. Do not ever prolong the recovery or repair problems.

Problem No 3

burnt bulb

Burnt Bulbs

This is among the common problems that can occur in landscape lightning and cause darkness.

Reasons for Burnt Out Bulbs

There is a possibility that the bulb burns because of excessive heat or excessive vibrations, which they cannot handle.

Moreover, it is a significant issue because the bulbs used for landscape lighting are always made with a lifetime warranty, and they should not be burnt out in any case.

If your bulbs are continuously burning out and causing disconnections, there must be a root cause that should be dug out before it causes more harm.

Solutions of Burnt out Bulbs

Keep the extra storage of similar bulbs as you use in your landscape lighting. These should be of similar sizes and wattage.

So you would be able to replace the bulb yourself. Additionally, you can focus on the company and warranty of the bulbs you use in your outdoor lighting.

Get an efficient product with a high rating that would last longer and may even last for a lifetime. Get a professional company to help if you think you cannot replace the bulb yourself and solve the issue on your own.

Problem No 4

Landscape Lighting insect

Animals And Bugs

Many animals are attracted to the lights because the landscape lightning is outdoors or in the outdoor garden. Your lightning’s bulbs and wires may attract many flying insects.

Reasons For Problems Caused By Animals and Bugs

Because of the bright lightning, animals and insects are attracted to your landscape lighting. There are many birds and flying insects that may build a hole in your wires with their stings.

Moreover, bugs and insects can bite your wires and make them expose to the environment. They are resulting in the short sparkling of the connections, entering of the water in wires, and exposure of the cables to different hazardous environmental factors.

Solutions To Problems Caused By Insects And Animals

It is not a difficult task to control the animals and bugs interrupting your landscape lighting. You go with the DIY hacks to save your wiring and bulbs from the exposure of animals and insects.

Keep your devotion and attention towards pest control since you notice them for the very first time. It will not exaggerate the cause and will not damage your wires, bulb, and connections, not causing you any serious harm.


How do you test LED landscape lights?

You have to be careful while testing LED landscape lights. Firstly remove the bulb from the connection and take a multimeter’s lead and enter it in the center of the bulb’s socket. The ideal voltage for outdoor lightning is from 12 to 10.8V.

How much does it cost to replace a transformer?

The transformer is professional in converting incoming electrical power into voltages. The expenditure that comes on replacing a transformer lies in between $100 to $200. Whereas in addition to this rate, the labors rate is separate.

How long do landscape light transformers last?

There are different warranties on which the light transformers come. These come with warranties in between 1 year to 10 years. Additionally, if you have a fixture composed of stainless steel, brass, and copper, these will shine almost permanently.

How do I choose the right landscape lighting for my outdoor space?

Choosing the right landscape lighting for your outdoor space depends on several factors such as the purpose of the lighting, the style of your home, and your personal preferences. Consider the type of lighting you need, whether it’s ambient, task, or accent lighting.

Also, choose lighting fixtures that complement the style of your home and the outdoor space. Look for fixtures that are durable, weather-resistant, and energy-efficient. Lastly, decide on the placement of the lights and the level of brightness you need to achieve the desired effect.

Can I install landscape lighting on my own, or do I need a professional?

It is possible to install landscape lighting on your own if you have the necessary skills and knowledge. However, if you are not experienced in electrical work or are not confident in your abilities, it’s best to hire a professional to install the lighting.

Professionals can ensure that the lighting is installed safely, properly, and in compliance with local codes and regulations. They can also help you choose the right lighting fixtures and design a layout that meets your needs and preferences.

How do I maintain my landscape lighting to ensure it lasts a long time?

To ensure your landscape lighting lasts a long time, you should perform regular maintenance checks. Check the wiring and connections for any signs of wear and tear or damage.

Clean the fixtures to remove any dirt, debris, or rust. Replace any burnt-out bulbs promptly. Also, consider using LED bulbs as they have a longer lifespan and are more energy-efficient.

Lastly, protect the lighting fixtures from extreme weather conditions by using weather-resistant materials and covering them during severe weather.

Can I use solar-powered landscape lighting instead of traditional lighting?

Yes, you can use solar-powered landscape lighting instead of traditional lighting. Solar-powered lighting uses solar panels to collect energy from the sun during the day and store it in rechargeable batteries.

This stored energy powers the lights at night. Solar-powered lighting is energy-efficient, cost-effective, and easy to install. However, it may not be as bright or reliable as traditional lighting, especially in areas with limited sunlight.

How do I troubleshoot landscape lighting that’s not working?

If your landscape lighting is not working, the first thing you should check is the power source. Make sure the lighting is connected to a functioning power source and that the circuit breaker is not tripped.

Check the bulbs to ensure they are not burnt out or loose. Inspect the wiring and connections for any signs of damage or disconnection. If you are unable to identify and fix the problem, consider hiring a professional to troubleshoot the lighting.


This article has four causes and reasons responsible for harming your wires and bulbs in landscape lightning. Keep in mind to check the overall connections of landscape lightning every month to ensure you live in a safe environment.

Any small or large problem results in damaging your connections and bulbs and may become the cause of some severe hazard.

Read this article to get all the knowledge related to four major problems and their solutions that you can practice independently without any professional help.

But if you think that you cannot solve the problem by yourself, definitely go for professional service as soon as possible to avoid any extreme danger.