How To Replace Projection Lamp For Sony Tv Kdf 55e2000

projector lamps come in different shapes and sizes, so it is important to know the model of your projector before purchasing a new lamp. In this blog post, we will provide instructions on How To Replace Projection Lamp For Sony Tv Kdf 55e2000.

Keep in mind that different models may have slight variations, so be sure to consult your user manual if you are unsure about how to proceed. 

What Is Projection Lamp:

A projection lamp is the part of a projector that emits light. This light is then projected onto a screen, creating an image. 

What Are The Types Of Projection Lamp:

There are two main types of projection lamps: 

1. Xenon Lamps:

 These are the most common type of projection lamp and they offer a high level of brightness. They also have a long lifespan, making them a good choice for those who use their projector frequently.

2. LED Lamps :

These lamps are becoming more popular as they offer a lower level of power consumption and they also have a longer lifespan than xenon lamps.

When Should I Replace My Projection Lamp?

It is typically recommended that you replace your projection lamp every 2000-3000 hours of use. However, this will vary depending on the type of projector you have as well as how frequently you use it.

If you notice that the image quality from your projector is starting to degrade, then it is probably time to replace the lamp. 

How To Replace Projection Lamp For Sony Tv Kdf 55e2000:

You can replace the projection lamp for sony tv kdf 55e2000 by the following methods.

1. Disconnect Power:

Disconnect the power cord from the AC outlet.

2. Remove Cover:

Remove the projector top cover by loosening the two captive screws that secure it in place.

3. Locate Lamp:

Find the projection lamp located inside the projector. It will be housed in a metal cage.

4. Unscrew Cage:

Unscrew the two screws that secure the metal cage in place.

5. Remove Old Lamp:

Carefully remove the old lamp from the cage and dispose of it properly.

6. Insert New Lamp:

Insert the new lamp into the cage and screw it in place.

7. Replace Cover:

Replace the projector top cover and screw it in place.

8. Connect Power:

Reconnect the power cord to the AC outlet.

9. Reset Lamp Timer:

Once the new lamp is in place, you will need to reset the lamp timer. This can usually be done by pressing and holding the reset button for 5 seconds.

Check your user manual for specific instructions on how to reset the lamp timer for your model of projector.

10. Power On:

Turn on the projector and enjoy your new lamp!

Precaution Of Replacing  Projection Lamp:

1. Turn off the projector and unplug the power cord before replacing the lamp.

2. Never touch the glass of the projection lamp with your bare hands. The oils from your skin can damage the lamp.

3. Be careful not to drop the projection lamp as this can break the glass and cause it to leak dangerous chemicals.

4. Never attempt to open the projector housing as this can void your warranty and cause serious damage to the projector.

5. If you are not comfortable replacing the projection lamp yourself, then please contact a professional for help.

Advantages Of  Replacing  Projection Lamp:

1. Improved Image Quality:

Over time, the projection lamp will start to degrade and this will result in a decrease in image quality. Replacing the lamp will improve the image quality of your projector.

2. Brighter Light Output:

As the projection lamp starts to age, it will also start to lose its brightness. This can make it difficult to see the image on the screen, especially in rooms with ambient light. Replacing the lamp will restore the full brightness of your projector.

3. Longer Lifespan:

Replacing the projection lamp on a regular basis will extend the lifespan of your projector. This is because a new lamp will not have to work as hard as an old lamp, which can lead to premature failure.

4. Reduced Maintenance Costs:

By replacing the projection lamp on a regular basis, you can avoid having to pay for expensive repairs or replacements down the line. This will save you money in the long run.

Drawbacks Of Replacing Projection Lamp:

1. Cost:

Replacing the projection lamp can be a costly affair, especially if you have to do it frequently.

2. Difficulty:

Replacing the projection lamp can be a difficult task, especially if you have never done it before. If you are not comfortable with doing it yourself, then you will need to hire a professional.

3. Risk of Damage:

If you are not careful, then you could end up damaging your projector while replacing the projection lamp. This is because the projector is a delicate piece of equipment and it can be easily damaged.

4. Risk of Injury:

If you are not careful, then you could end up injuring yourself while replacing the projection lamp. This is because the lamp is made of glass and it can be fragile.


 Replacing the projection lamp on your Sony KDF 55E2000 TV is a relatively easy process that can be completed in about 15 minutes. Be sure to power off the TV and unplug it from the wall before beginning this project.

The new lamp can be purchased from most electronics stores or online retailers. If you have any questions or concerns, please consult your television’s user manual or contact our team for assistance. 


1. What is the most common projection lamp failure?

Answer: Most projection lamps failures are the result of user error, not manufacturer defects. The most common ways in which projector lamps are damaged are when they are handled improperly.

2. How can you tell if your projection lamp needs to be replaced? 

 Answer: Signs that a projection lamp may need to be replaced include: the image being faint or difficult to see, the projector being very noisy, or the projector shutting off automatically. 

3. What are the consequences of not replacing a projection lamp?

 Answer: Lamp users can be in danger of not getting the best image quality possible if they do not replace their projection lamps. In fact, most projection lamps have a lifespan of 3,000 hours. When a projection lamp is not replaced in a timely manner.